Getting a WiFi dongle for EV3

[pepijndevos]

Ok, I have good news, this baby works with the LejOS image!



The other good news is that I made a serial cable.

The bad news is that the serial cable cannot be used for running commands.
The other bad news is that my batteries are empty. I want a walll socket to the thing..

[robotic-javi]

Hey!

this is my first post, so I hope I am doing it right because I don't know if it is ok to write this post here. I acquired a NETGEAR N150 Wireless USB Adapter WNA 1100 for testing the wifi properties of my EV3. I follow this instructons: http://www.monobrick.dk/guides/how-to-e ... ev3-brick/ but I have a problem on the first step.

I put the wifi dongle on my EV3, I enable the wifi connections, I choose my network (which has a WPA-Personal password) and when I put it an Error message appears on the screen of the EV3 brick.

Has anyone try this and succeed?

Thank you for everything!
Javi

[lvoc]

Can you be more specific about what the error message says? Also, I am not sure if the EV3 supports WAP, I use WAP2 all the time and it works fine. I've had problems in the past writing complex passwords, you may want to set (if you can) and easier one, or no password at all.