hardware selection help for a large scale project

Discussion specific to the intelligent brick, sensors, motors, and more.
Post Reply
Posts: 1
Joined: 09 Mar 2017, 05:21

hardware selection help for a large scale project

Post by PunchyRoller » 09 Mar 2017, 18:00

Helllo! I am a lego tinkerer and have made a few large scale projects, mostly floor lamps and such that only required lighting.

I have been asked by a local art gallery to put-together a "putt-putt" golf course hole. I added a few concept sketches.

So the basic idea to use lego robotics and have the ball go down the tongue and trigger a touch sensor, "wake up" a motor
that will turn on some lights using line current and a switch, another motor that will cause the wings to move up and down and
then through some process release a trap door allowing the ball to exit the dragon's butt hole.

I have a bunch of old robotics stuff, a couple of the blue "scout" boxes, a bunch of sensors and motors, a few of the mini-scouts or whatever
they called the ones that came with the droid developer (R2D2 and AT-AT) kits etc. But nothing of a current vintage.

I have not been able to figure out how to program the scout to "wake up", run a cycle and 'stop'. I have seen newer kits that for example
the robot has a touch sensor on his arm to wake him up.

So I'm wondering anyone has a suggestion on which newer kit to purchase to get this basic stuff to work, if that is what I would need.

For an idea of scale, the dragon will be about 6 feet long and I already have about 20 pounds of green legos.

Please write back if you have any suggestions on how to get something like this to work.
smll dargon a 1.jpg
smll dargon ab 1.jpg
smll dargon 1.jpg

Site Admin
Posts: 14
Joined: 15 Sep 2014, 20:21

Re: hardware selection help for a large scale project

Post by sebastiantrella » 23 Mar 2017, 20:04

That is a really impressive project! Please share pictures!

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests